HP Spooler FASTP Manual page 122

Installation and Configuration Considerations for
FASTPTCP
Table 3-3. Supported CONTROLBUF Operations for LPD Devices (page 2 of 2)
Buffer
Value Contents
119 burst
banner
name
120 source file
name
121 mail-when-
printed
name
122 PR title text
123 0 or 1
124 0 or 1
125 TROFFR
file name
126 TROFFI file
name
127 TROFFB
file name
128 TROFFS
file name
129 indent count
Spooler FASTP Network Print Processes Manual — 427528-006
Action
FASTPTCP uses the new burst banner name specified in the L -
Print banner page command. This name replaces any
BURSTBANNER specified in the FASTCNFG file.
FASTPTCP uses the new source file name specified in the N -
Name of source file command. This name replaces any
SOURCEFILE specified in the FASTCNFG file.
FASTPTCP uses the mail-when-printed name specified and emits
the M - Mail When Printed command.
FASTPTCP uses the PR Title text specified and emits the T -
Title for pr command.
If the first word contained in the buffer is zero (all bits off),
FASTPTCP does not emit the L - Print banner page
command. If the first word in the buffer is any value other than
zero, FASTPTCP emits this command. This value overrides any
setting of PRINTBANNER in the FASTCNFG file.
If the first word contained in the buffer is zero (all bits off),
FASTPTCP does not emit the U - Unlink data file
command. If the first word in the buffer is any value other than
zero, FASTPTCP emits this command. This value overrides any
setting of UNLINK in the FASTCNFG file.
FASTPTCP uses the TROFFR file name specified and emits the 
1 - troff R font command.
FASTPTCP uses the TROFFI file name specified and emits the 
2 - troff I font command.
FASTPTCP uses the TROFFB file name specified and emits the 
3 - troff B font command.
FASTPTCP uses the TROFFS file name specified and emits the 
4 - troff S font command.
FASTPTCP uses the first word of the buffer as the count in the 
I - Indent Printing command.
3 - 54
CONTROLBUF Operations