HP Spooler FASTP Manual page 138

Installation, Configuration, and Usage
Considerations for FASTPSMB
TYPE = 
{
DOMAIN |
GATEWAY |
POOL
}
specifies the object type for the RESOURCE attribute.
For NBT and NBX, the object type must be DOMAIN.
For TLAM (D-series only), the object type is configured with SCF as part of TLAM
and Multilan configuration as follows:

A DOMAIN object represents a particular LAN.

A GATEWAY object represents an MLAD.

A POOL object represents a resource on an adapter card used to store
NetBIOS names and sessions.
The TYPE specification is optional. If the TYPE attribute is not specified, the
default object type is DOMAIN.
USERNAME = account-name
specifies an account name (also called a user ID), if an account name is required,
for user-mode access to the SMB LAN print queue.
Establishing an account name is part of the SMB print-server application
processing. This name is used by the FASTPSMB print process when it
establishes a NetBIOS session with the SMB print-server application.
This attribute value is case sensitive.
USERPWORD = account-password
specifies an account password, if a password is required, for user-mode access to
the SMB LAN print queue. Passwords are required for all user IDs except guest
IDs.
Establishing an account password is part of the SMB print-server application
processing. This password is used by the FASTPSMB print process (in conjunction
with the account name) when it establishes a NetBIOS session with the SMB print-
server application.
This attribute value is case sensitive.
Spooler FASTP Network Print Processes Manual — 427528-006
Optional DEVICE Attributes for FASTPSMB
4 - 14