HP Spooler FASTP Manual page 281

EMS Messages
512
proc-num DEV: device-name Could not find return address for
LEXMARK protocol. SPI Err: err-num
proc-num
is the process number (CPU, PIN) of the process.
device-name
is the Spooler device name.
err-num
is an SPI error code from TCP/IP.
Cause. This message applies to FASTPTCP and Lexmark printers only. The problem
is external to FASTPTCP. The TCP/IP SPI interface attempt to read the controller IP
address failed.
Effect. No printing occurs The Spooler job is requeued, and the Spooler device is
placed offline.
Recovery. Resolve the problem with SPI and TCP/IP, or try another TCP/IP process
and then restart the device. (Depending on the device configuration, the device might
restart automatically.)
512
proc-num DEV: device-name Created SHADOW file file-name
proc-num
is the process number (CPU, PIN) of the process.
device-name
is the Spooler device name.
file-name
is the shadow trace file name.
Cause. A shadow trace file was created.
Effect. None; this message is an informational message only.
Recovery. Informational message only; no corrective action is needed.
Spooler FASTP Network Print Processes Manual — 427528-006
B - 69
FASTP EMS 512 Text Messages