HP Spooler FASTP Manual page 237

EMS Messages
44
proc-name DEV: device-name MBCS Conflict - Using SETMODE 144
value mmmm instead of CHARMAP nnnn
proc-name
is the process name of the FASTPTCP process.
device-name
is the Spooler device name.
mmmm
is the value returned by the SETMODE 144 call.
nnnn
is the CHARMAP conversion value specified using the Spoolcom DEV command in
the Spooler configuration.
Cause. This error applies to SNAX devices only. The FASTPTCP process detected a
conflict between the CHARMAP conversion value specified in the Spooler
configuration and the value returned by the Guardian SETMODE 144 call.
Effect. The FASTPTCP process uses the SETMODE 144 value in place of the value
specified by the CHARMAP parameter.
Recovery. If the error persists, contact your service provider as described in
Troubleshooting and Reporting Problems
Spooler FASTP Network Print Processes Manual — 427528-006
on page 8-1.
B - 25
FASTPTCP Event Messages