Optional Device Attributes For Fastpx25 - HP Spooler FASTP Manual

Installation and Configuration Considerations for
FASTPX25
For a complete discussion about the use and creation of the FASTCNFG file, see
Configuring a FASTCNFG File
X.25 printer is as follows:
DEVICE [\node.]$devicename[.#qualifier]
CONTYPE
X25NUA
NOINVITATION = {YES|NO}
RECOVERY
SHADOW
SHADOW2
SHADOW3
SHADOW4
SHADOW5
SHADOW6
SHADOW7
SHADOW8
SUBS140
SVCLIST
SVCMACRO
TIMEOUT
where the required attributes are defined as follows:
[\node.]$devicename[.#qualifer]
specifies the Spooler device name for the X.25 printer. If the name is not fully
qualified, the default node name for the process executing the command is
substituted. The node name is separated from the device name with a period (.).
The value specified can vary based on your SVC configuration. See
on page 6-9 for the formats used for the Spooler device name for an X.25 device.
CONTYPE = X25
specifies the type of connection used for the device. The CONTYPE value must be
specified as X25.

Optional DEVICE Attributes for FASTPX25

The optional DEVICE attributes for FASTPX25 are as follows:
X25NUA = netuseraddress
specifies 14 bytes or less of X25 network user address (NUA). If this attribute is
specified, FASTPX25 will call this NUA in order to reach the printer. Any NUA
configured as the DESTADDR for the X25AM subdevice is ignored. This attribute
should always be used when implementing SVC sharing. This attribute should not
be used if the X25AM SU is configured to use a Permanent Virtual Circuit (PVC).
Spooler FASTP Network Print Processes Manual — 427528-006
on page 2-17. The syntax of a DEVICE entry for an
= X25
= netuseraddress
= {NORMAL|REPRINT}
= shadow-file-name
= shadow-file-name2
= shadow-file-name3
= shadow-file-name4
= shadow-file-name5
= shadow-file-name6
= shadow-file-name7
= shadow-file-name8
= subvalue
= svc [,svc,...];
= svclist
= timeout
6 - 13
Optional DEVICE Attributes for FASTPX25
!Required
!Optional
!Optional
!Optional
!Optional
!Optional
!Optional
!Optional
!Optional
!Optional
!Optional
!Optional
!Optional
!Optional
!Optional
!Optional
Device Names