HP Spooler FASTP Manual page 147

Installation, Configuration, and Usage
Considerations for FASTPNOV
DEVICE [\node.]$device-name[.#qualifier]
CONTYPE = NetWare
PASSWORD = password
QUEUE = NetWare-print-queue-name
SERVER = NetWare-file-server-name
USERID = user-ID
BANNER = {ON|OFF}
CHARSET =
SHADOW = shadow-file-name
SHADOW2 = shadow-file-name2
SHADOW3 = shadow-file-name3
SHADOW4 = shadow-file-name4
SHADOW5 = shadow-file-name5
SHADOW6 = shadow-file-name6
SHADOW7 = shadow-file-name7
SHADOW8 = shadow-file-name8
TIMEOUT = interval
where the required attributes are defined as follows:
DEVICE [\node.]$device-name[.#qualifier]
specifies the Spooler device name for the NetWare print queue. If the node name
is omitted, the default node name is the name of the node on which the
FASTPNOV print process is running.
CONTYPE = NETWARE
specifies the type of connection used for the device. The CONTYPE attribute must
be specified as NETWARE. The value is not case sensitive.
PASSWORD = password
specifies a valid password for the user ID defined with the USERID attribute. The
length of the password can be from 1 to 20 characters. The PASSWORD
specification is mandatory.
Spooler FASTP Network Print Processes Manual — 427528-006
{
DANSK7 | DANSK8 |
DEUTSCH7 | DEUTSCH8 |
ESPANOL7 | ESPANOL8 |
FRANCAIS7 | FRANCAIS8 |
NONE |
NORSK7 | NORSK8 |
SVENSK7 | SVENSK8 |
UK7 | UK8 |
US7 | US8
}
FASTCNFG DEVICE Configuration for FASTPNOV
5 - 7
!Required
!Required
!Required
!Required
!Required
!Required
!Optional
!Optional
!Optional
!Optional
!Optional
!Optional
!Optional
!Optional
!Optional
!Optional
!Optional