HP Spooler FASTP Manual page 250

EMS Messages
65
proc-name DEV: device-name tell^super param3 err %param4
proc-name
is the process name of the FASTPTCP process.
device-name
is the Spooler device name.
param3, param4
are values for FASTPTCP development use only.
Cause. This message is for FASTPTCP development use only and is generated only
when bit 2 (%20000) of PRINT PARM is used.
Effect. None; this message is an informational message only. It does not affect job
printing.
Recovery. Informational message only; no corrective action is needed.
66
proc-name Dev debug: param2
proc-name
is the process name of the FASTPTCP process.
param2
is a value for FASTPTCP development use only.
Cause. This message is for FASTPTCP development use only and is generated only
when bit 2 (%20000) of PRINT PARM is used.
Effect. None; this message is an informational message only. It does not affect job
printing.
Recovery. Informational message only; no corrective action is needed.
Spooler FASTP Network Print Processes Manual — 427528-006
B - 38
FASTPTCP Event Messages