HP Spooler FASTP Manual page 309

EMS Messages
Recovery. When the job is completed, the next available job is serviced. Add more
print queues to the NetWare file server.
NetWare Error=Hex 002100D8
Cause. The NetWare file server print queue is not in an active state.
Effect. FASTPNOV puts any devices representing print queues for the NetWare file
server offline.
Recovery. Check the print queue configuration on the NetWare file server. Restart the
Spooler device. (Depending on the device configuration, the device might restart
automatically.)
512
proc-num DEV: device-name, NETWARE ERROR in END_NOVL_SESSION
Guardian Error=file-err NetWare Error=netware-error
proc-num
is the process number (CPU, PIN) of the process.
device-name
is the Spooler device name.
file-err
is the file-system error returned. See the Guardian Procedure Errors and
Messages Manual for explanations of file-system errors.
netware-error
is an error returned from the NetWare LAN. If a value of 0 is returned, a file-system
error has occurred. Any other value indicates a NetWare error.
This error applies to FASTPNOV only. The cause, effect, and recovery vary based on
the NetWare error returned as follows:
NetWare Error=0
Cause. A file-system error has occurred.
Effect. The effect depends on which file-system error occurred. See the Guardian
Procedure Errors and Messages Manual for explanations of file-system errors.
Recovery. See the Guardian Procedure Errors and Messages Manual for recovery
actions for file-system errors.
NetWare Error=Hex 00210006, Hex 00210096, Hex 002100FC, or Hex 002100FF
Cause. An error occurred after the job completed successfully.
Spooler FASTP Network Print Processes Manual — 427528-006
B - 97
FASTP EMS 512 Text Messages