Using Macro Entries - HP Spooler FASTP Manual

Installation and Configuration Considerations for
FASTPX25

Using MACRO Entries

To support the SVCMACRO attribute in the DEVICE entry, one or more SVCLISTs can
be specified using MACRO entries. These lists can then be referred to by name in the
DEVICE entries.
The syntax for the FASTCNFG MACRO entry is as follows:
MACRO name
SVCLIST = svc [,svc,...];
where
name
specifies a string consisting of up to 32 non-blank characters used to identify an
SVC list. This name is then used as the argument to SVCMACRO in the DEVICE
entry.
svc
specifies a list of between 1 and 256 X.25 SVCs. Each SVC must be separated by
at least one space and the list must be completed with a semicolon (;).
For example:
MACRO LISTA
SVCLIST = $X25B.#S1 $X25B.#S2
Spooler FASTP Network Print Processes Manual — 427528-006

$X25C.#S1 $X25C.#S2;
6 - 16
Using MACRO Entries