Panasonic MINAS A5-series Operating Instructions Manual page 12

Maintenance and Inspections
Guideline for Parts Replacement
Use the table below for a reference. Parts replacement cycle varies depending on the ac-
tual operating conditions. Defective parts should be replaced or repaired when any error
have occurred.
Product
Smoothing condenser
Driver
Motor
Related page
• P.7-96 "Warranty"
12
Disassembling for inspection and repair should be
carried out only by authorized dealers or service
Prohibited
company.
Component
Cooling fan
Aluminum electrolytic
capacitor (on PCB)
Rush current
preventive relay
Rush current
preventive resistor
Bearing
Oil seal
Encoder
Battery
for absolute encoder
Standard replacement
cycles (hour)
Approx. 5 years
2 to  years
(10,000 to 0,000 hours)
Approx. 5 years
Approx. 100,000 times
(depending on working
condition)
Approx. 20,000 times
(depending on working
condition)
 to 5 years
(20,000 to 0,000 hours)
5000 hours
 to 5 years
(20,000 to 0,000 hours)
Life time varies depending
on working conditions.
Refer to the Operating
Instructions attached to the
battery for absolute
encoder.
Note
These hours or cycles are
reference.
When you experience any
error, replacement is required
even before this standard
replacement cycle.