15. How to Use the Front Panel
Auxiliary Function Mode (EXECUTION display)
(5) Initialization of parameter
Initialize the parameter.
SELECTION display
• Press
to call for
EXECUTION display.
Caution
• Parameter cannot be initialized when one of the following error occurs: Err11.0 "Under
voltage protection of control power supply", EEPROM related errors (Err36.0, Err36.1,
Err36.2, Err37.0, Err37.1 and Err37.2) - initialization will result in "Error" display.
• After initialization of parameter finishes, return to SELECTION display, referring to structure
Note
of each mode (P.2-54).
2-80
• Keep pressing
(SET button)
when you execute Initialization of parameter.
Initialization of
parameter completes
EXECUTION display
until the display changes to
"
" increases while keep
pressing
(for approx. 5sec)
as the right fig. shows.
Initialization of parameter
Initialization
finishes
Error occurs
(Minor error occurs)