Panasonic MINAS A5-series Operating Instructions Manual page 41

1. Conformance to international standards
Composition of Peripheral Equipments
Surge Absorber
Option part No.
DV0P1450
DV0P4190
Noise Filter for Signal Lines
Option part No.
DV0P1460
Residual current device
Install a type B Residual current device (RCD) at primary side of the power supply.
Grounding
(1) Connect the protective earth terminal (
minal (PE) of the control box without fail to prevent electrical shocks.
(2) Do not make a joint connection to the protective earth terminals (
provided for protective earth.
Note
For driver and applicable peripheral equipments, refer to P.2-6 "Driver and List of Applicable
Peripheral Equipments".
Voltage specifications
for driver
3-phase 200V
Single phase 100V/200V
Manufacturer's
part No.
ZCAT3035-1330
Manufacturer's
Manufacturer
part No.
RAV-781BXZ-4 Okaya Electric Ind.
RAV-781BWZ-4 Okaya Electric Ind.
Manufacturer
TDK Corp.
) of the driver and the protective earth ter-
1
2
3
4
). 2 terminals are
5
6
7
2-5