Panasonic MINAS A5-series Operating Instructions Manual page 103

15. How to Use the Front Panel
Monitor Mode (EXECUTION display)
(11) Display of No. of changes in I/O signals
• Shift the flashing decimal point with
• The switch of input/output, by pressing
• Select the No. of pin, the number of changes on that pin should be displayed,
by pressing
(12) Display of absolute encoder data
• Select the data to be displayed by pressing
No. of changes in I/O signals (the signal is invalid)
Pin No.
.....Input signal
.....Output signal
(Left side of decimal point : Pin No. selection)
(Right side of decimal point : Input/Output Pin No. selection)
or button.
Encoder data
......One revolution data, Low order (L)
......One revolution data, High order (H)
......Multi-revolution data
.
or button.
(Lowest place Pin No.
of output signal)
(Highest place Pin No.
of input signal)
or button.
1
2
3
4
5
6
7
2-67