Panasonic MINAS A5-series Operating Instructions Manual page 9

Observe the specified mounting method and di-
rection.
Use the eye bolt of the motor for transportation of
the motor only, and never use this for transporta-
tion of the machine.
Don't place any obstacle object around the motor
and peripheral, which blocks air passage.
Adjust the motor and driver ambient environmen-
tal condition to match the motor operating tem-
perature and humidity.
Create the specified clearance between the driver
and the control panel inner surface or other de-
vices.
Observe the specified voltage.
Connect the brake control relay to the relay which
is to shut off at emergency stop in series.
Provide protection device against idling of electro-
magnetic brake or gear head, or grease leakage
from gear head.
Use the motor and the driver in the specified com-
bination.
Test-run the securely fixed motor without loading
to verify normal operation, and then connect it to
the mechanical system.
When any error occurs, remove the cause and
release the error after securing the safety, then
restart.
If the driver fails, shut off the power on the power
supply side of the driver.
Maintenance must be performed by an experi-
enced personnel.
Always keep power disconnected when the power
is not necessary for a long time.
When you dispose the batteries, observe any applicable regulations or laws after
insulating them with tape.
This Product shall be treated as Industrial Waste when you dispose.
Failure to heed these require-
ments will result in personal
injury or malfunction.
Using it for transportation of the
machine will cause personal
injury or malfunction.
Temperature rise will cause
burn injury or fire.
Failure to heed these require-
ments will result in personal
injury or malfunction.
Operation from a voltage out-
side the rated voltage will cause
electric shock, personal injury
or fire.
Missing of one of these devices
will result in personal injury or
malfunction.
No protection will cause per-
sonal injury, damage, pollution
or fire.
Not using the motor and the
driver in the specified combina-
tion will result in fire.
Operation using a wrong model
or wrong wiring connection will
result in personal injury.
Not removing the cause of the
error will result in personal in-
jury.
Allowing a large current to con-
tinue to pass will result in fire.
Wrong wiring will cause person-
al injury or electric shock.
Improper operation will cause
personal injury.
1
2
3
4
5
6
7
9