2
Preparation
Use each button on the touch panel to select the structure and switch the mode.
Initial status of
the Console LED
Note
You can change the flashing decimal point with
Caution
On power-up, the monitor mode executed is displayed according to the setup of Pr5.28 LED
initial status.
2-54
15. How to Use the Front Panel
Structure of Each Mode
Monitor
mode
P.2-57
(SET button)
Parameter
set up mode
P.2-72
EEPROM
writing mode
P.2-73
Auxiliary
function mode
P.2-74
SELECTION display
(Mode switching button)
(Mode switching button)
(Mode switching button)
(Mode switching button)
, then shift the digit for data change " "