Panasonic MINAS A5-series Operating Instructions Manual page 311

2. Absolute system
Battery (for Backup) Installation
When you make your own cable for 17-bit absolute encoder
When you make your own cable for 17-bit absolute encoder, connect the optional battery
for absolute encoder, DV0P2060 or DV0P2990 as per the wiring diagram below. Connec-
tor of the battery for absolute encoder shall be provided by customer as well.
Caution
Install and fix the battery securely. If the installation and fixing of the battery is not appro-
priate, it may cause the wire breakdown or damage of the battery.
Refer to the instruction manual of the battery for handling the battery.
• Installation Place
1) Indoors, where the products are not subjected to rain or direct sun beam.
2) Where the products are not subjected to corrosive atmospheres such as hydrogen
sulfide, sulfurous acid, chlorine, ammonia, chloric gas, sulfuric gas, acid, alkaline
and salt and so on, and are free from splash of inflammable gas, grinding oil, oil
mist, iron powder or chips and etc.
3) Well-ventilated and humid and dust-free place.
4) Vibration-free place
• Wiring Diagram
Junction connector for
encoder cable
(Optional connector kit)
6 (4)
E5V
3 (1)
E0V
5 (6)
BAT+
2 (5)
BAT–
7 (3)
PS
4 (7)
PS
1 (9)
FG
Title
Connector
Connector pin SMM-003T-P0.5
Clamping Jig
Related page
• P.7-89 "Battery For Absolute Encoder"
Pin number when a connector (small motor) is used
Pin number when a connector (large motor) is used
1
BAT+
2
BAT–
Part No. Manufacturer
ZMR-2 J.S.T.
J.S.T.
YRS-800 J.S.T.
Twisted
pair
Battery box for absolute encoder:
DV0P2990
Battery *1
1
BAT+
2
BAT–
Connector, ZHR-2
(by J.S.T.)
*1 Battery for absolute encoder (Option):
DV0P2990
Connector for absolute encoder connection
(To be provided by customer)
Connector, CN X6
(Optional connector kit)
1
E5V
2
E0V
5
PS
6
PS
FG (Case)
7-15
1
2
3
4
5
6
7