Unattended Installation Of Hdlm - Hitachi XP P9500 User Manual

20. Mount the logical volume that was moved.
In the following example, the logical volume is
command mounts the volume on
# mount /dev/vg01/lvol1 /mnt/lvol1
21. Specify the settings required for using virtual environments.
If you are using Xen, set up Xen to use HDLM devices in domainU. If you are
using KVM, register HDLM devices into the hardware configuration file. For
details on operating environments for the virtual environments supported by
HDLM, see 3.1.13 Virtual Environments Supported by HDLM. For details on
how to set up a virtual environment, see 3.11 Settings for Xen or 3.12 Settings
for KVM.
22. Specify the settings required for operations in a cluster configuration.
For a cluster configuration, change the logical device file names of SCSI devices
specified in the cluster to logical device file names of HDLM devices.
For details on setting the cluster software, see 3.13 Settings for Heartbeat,
3.14 Settings for Oracle RAC, 3.15 Settings for the RHCM, or 3.16 Settings for
VCS.

3.6.6 Unattended Installation of HDLM

When you perform a new installation, re-installation, or upgrade installation of
HDLM, you can choose an unattended installation. An unattended installation enables
a user to install HDLM without entering information.
The procedure for performing an unattended installation of HDLM is described below.
Note that preparations before installing HDLM are required. For details about the
preparations before performing a new installation of HDLM, see 3.6.1 Preparations
for a New Installation of HDLM. For details about the preparations before performing
a re-installation or an upgrade installation of HDLM, see 3.6.3 Preparations for an
Upgrade Installation or Re-installation of HDLM.
1. Log on to Linux as the root user.
2. In the following cases, prepare the license key or the license key file:
• If you are installing HDLM for the first time
• If you are upgrading or re-installing HDLM after the licensing term has
expired
If the directory that contains the license key or the license key file is specified in
the installation information settings file, you can use any storage directory name
and file name. The license key file or license key is not deleted after the
3. Creating an HDLM Environment
/dev/vg01/lvol1
:
/mnt/lvol1
and the
165