Performing A New Installation Of Hdlm - Hitachi XP P9500 User Manual

information on license key types, see
Environment) on page 6-15
• Terminate all programs that are running before installing HDLM.
• HDLM uses the Windows Installer service. Therefore, when you install
HDLM, take the following precautions:
¢
¢
If you install HDLM while the Startup Type setting for the Windows
Installer service is disabled or while another program is using the
Windows Installer service, the installation might fail.
If this problem occurs, make sure that both of the above conditions are
satisfied, and then install HDLM again.
Be aware that even though a re-installation of HDLM failed, the Add/
Remove Programs window might indicate that HDLM has been installed
normally.
• In Windows 7 (x64) , Windows Server 2008, and Windows Vista (x64), we
recommend that you install HDLM in a folder other than Program Files.
Installing HDLM
When you install HDLM, Hitachi Network Objectplaza Trace Library will also be
installed.
The file path of the Hitachi Network Objectplaza Trace Library integrated
trace information file is installation-destination-drive:\Program Files
\HITACHI\HNTRLib2\spool\Hntr2n.log, where n is the number of the
integrated trace information file.
#
For Windows 7 (x64) , Windows Server 2008, and Windows Vista (x64),
Program Files is Program Files (x86).

Performing a New Installation of HDLM

The following describes how to perform a new installation of HDLM. Perform
the installation process on the remote management client and the host.
The installation procedure described here assumes that VMware vSphere has
been installed on the host, and the host and the storage system are
connected in a multi-path configuration.
You can install HDLM on the remote management client by using an
unattended installation. An unattended installation enables a user to install
HDLM without entering information.
To perform an unattended installation, the msi file, which is included in the
HDLM installation DVD-ROM, is required.
In the Startup Type setting for the Windows Installer service, specify
Manual or Automatic.
Before installing HDLM, make sure that no other programs are using
the Windows Installer service.
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for VMware(R))
set (Sets Up the Operating
.
#
3-5