Freescale Semiconductor MPC8260 PowerQUICC II Family Reference Manual page 200

System Interface Unit (SIU)
Bits Name
11 EAV Enable address visibility. Normally, when the PowerQUICC II is in single-PowerQUICC II bus mode,
the bank select signals for SDRAM accesses are multiplexed on the 60x bus address lines. So, for
SDRAM accesses, the internal address is not visible for debug purposes. However the bank select
signals can also be driven on dedicated pins (see SIUMCR[APPC]). In this case EAV can be used to
force address visibility.
0 Bank select signals are driven on 60x bus address lines. There is no full address visibility.
1 Bank select signals are not driven on address bus. During READ and WRITE commands to
SDRAM devices, the full address is driven on 60x bus address lines.
12 ETM Compatibility mode enable. See
0 Strict 60x bus mode. Extended transfer mode is disabled.
1 Extended transfer mode is enabled.
13 LETM Local bus compatibility mode enable. See
0 Extended transfer mode is disabled on the local bus.
1 Extended transfer mode is enable on the local bus.
Note that if the local bus memory controller is configured to work with read-modify-write parity, LETM
must be cleared.
14 EPAR Even parity. Determines odd or even parity on the 60x bus.
0 Odd parity
1 Even parity
Writing the memory with EPAR = 1 and reading the memory with EPAR = 0 generates parity errors
for testing.
15 LEPAR Local bus even parity. Determines odd or even parity on the local bus.
0 Odd parity
1 Even parity
Writing the memory with LEPAR = 1 and reading the memory with LEPAR = 0 generates parity errors
for testing.
16–18 NPQM Non PowerQUICC II master. Identifies the type of bus masters which are connected to the arbitration
lines when the PowerQUICC II is in internal arbiter mode. Possible types are PowerQUICC II master
and non-PowerQUICC II master. This field is related to the data pipelining bits (BRx[DR]) in the
memory controller. Because an external bus master that is not a PowerQUICC II cannot use the data
pipelining feature, the PowerQUICC II, which controls the memory, needs to know when a
non-PowerQUICC II master is accessing the memory and handle the transaction differently.
NPQM[0] designates the type of master connected to the set of pins BR, BG, and DBG.
NPQM[1] designates the type of master connected to the set of pins EXT_BR2, EXT_BG2, and
EXT_DBG2.
NPQM[2] designates the type of master which is connected to the set of pins EXT_BR3, EXT_BG3
and EXT_DBG3
0 The bus master connected to the arbitration lines is a PowerQUICC II.
1 The bus master connected to the arbitration lines is not a PowerQUICC II.
19–20 — Reserved, should be cleared.
4-28
Table 4-9. BCR Field Descriptions (continued)
Section 8.4.3.8, "Extended Transfer Mode."
MPC8260 PowerQUICC II Family Reference Manual, Rev. 2
Description
Section 8.4.3.8, "Extended Transfer Mode."
Freescale Semiconductor