Monitoring And Maintaining The Lane Components - Cisco Catalyst 8540 MSR Configuration Manual

LANE Configuration Tasks
Caution You can override the LECS address on any subinterface by using the lane auto-config-atm-address,
lane fixed-config-atm-address, and lane config-atm-address commands. When you perform an
override using one of these commands, however, fault-tolerant operation cannot be guaranteed. To avoid
affecting the fault-tolerant operation, do not override any LECS, LES, or BUS addresses.

Monitoring and Maintaining the LANE Components

After configuring LANE components on an interface or any of its subinterfaces, on a specified
subinterface, or on an emulated LAN, you can display their status. To show LANE information, use the
following EXEC commands:
Command
show lane [interface atm
card/subcard/port[.subinterface#] |
name elan-name] [brief]
show lane bus [interface atm
card/subcard/port[.subinterface#] |
name elan-name] [brief]
show lane client [interface atm
card/subcard/port[.subinterface#] |
name elan-name] [brief]
show lane config [interface atm
card/subcard/port[.subinterface#]]
show lane database [name]
show lane le-arp [interface atm
card/subcard/port[.subinterface#] |
name elan-name]
show lane server [interface atm
card/subcard/port[.subinterface#] |
name elan-name] [brief]
ATM Switch Router Software Configuration Guide
14-16
Chapter 14
Purpose
Displays the global and per-virtual channel
connection LANE information for all the LANE
components and emulated LANs configured on
an interface or any of its subinterfaces.
Displays the global and per-VCC LANE
information for the BUS configured on any
subinterface or emulated LAN.
Displays the global and per-VCC LANE
information for all LANE clients configured on
any subinterface or emulated LAN.
Displays the global and per-VCC LANE
information for the configuration server
configured on any interface.
Displays the LECS's database.
Displays the LANE ARP table of the LANE
client configured on the specified subinterface or
emulated LAN.
Displays the global and per-VCC LANE
information for the LES configured on a specified
subinterface or emulated LAN.
Configuring LAN Emulation
OL-7396-01