Cisco Catalyst 8540 MSR Configuration Manual page 600

Configuring T1/E1 CES SVCs
Command
Step 8 Switch(config-if)# ces dsx1 linecode {ami | b8zs}
Switch(config-if)# ces dsx1 linecode {ami |
hdb3}
Step 9 Switch(config-if)# ces circuit circuit-id timeslots
number
Step 10 Switch(config-if)# ces circuit circuit-id
circuit-name name
Step 11
Switch(config-if)# ces svc circuit-id passive
follow-ifstate
Step 12 Switch(config-if)# no shutdown
Example
The following example shows how to configure the destination (passive) side of a switched VC for
structured T1 CES, as shown in
CESwitch# show ces status
Interface
------------- -------- --------- ----------- -----------
CESwitch# configure terminal
CESwitch(config)# interface cbr 0/0/1
CESwitch(config-if)# shutdown
CESwitch(config-if)# ces aal1 service structured
CESwitch(config-if)# ces dsx1 clock source network-derived
CESwitch(config-if)# ces dsx1 framing esf
CESwitch(config-if)# ces dsx1 linecode b8zs
CESwitch(config-if)# ces circuit 1 timeslots 10-13
CESwitch(config-if)# ces circuit 1 circuit-name CBR-SVC-A
CESwitch(config-if)# no shutdown
CESwitch(config-if)# ces svc 1 passive follow-ifstate
ATM Switch Router Software Configuration Guide
19-50
IF Admin
Name Status Status
CBR0/0/0 UP
CBR0/0/1 UP
CBR0/0/2 UP
CBR0/0/3 UP
Purpose
Configures the CES T1 line code type. The
default is b8zs.
Configures the CES E1 line code type. The
default is hdb3.
Configures the following CES connection
attributes for the circuit:
Circuit id number.
•
–
–
Time slots for the circuit for structured
•
service only.
–
–
Configures the CES interface circuit name.
Configures the destination (passive) port circuit
status to follow the status of the physical
interface. The default circuit setting ignores the
status of the physical interface.
Reenables the interface.
Figure 19-9:
Port Channels in
Type use
UP T1
UP T1
UP T1
UP T1
Chapter 19 Configuring Circuit Emulation Services
For CES T1 structured service,
use 1 through 24.
For CES E1 structured service,
use 1 through 31.
For CES T1, the range is 1 through 24.
For CES E1, the range is 1 through 31.
OL-7396-01