Confirming Connectivity Between The Atm Switch And Other Lane Members - Cisco Catalyst 8540 MSR Configuration Manual

Chapter 14 Configuring LAN Emulation
Catalyst 5500 Switch 1
Switch1> session 4
Trying ATM-4...
Connected to ATM-4.
Escape character is '^]'.
ATM> enable
ATM# configure terminal
Enter configuration commands, one per line.
ATM(config)# interface atm 0
ATM(config-if)# lane server-bus ethernet eng_elan
ATM(config-if)# end
ATM# copy system:running-config nvram:startup-config
Building configuration...
[OK]
ATM# configure terminal
Enter configuration commands, one per line.
ATM(config)# interface atm 0
ATM(config-if)# atm pvc 1 0 5 qsaal
ATM(config-if)# atm pvc 2 0 16 ilmi
ATM(config-if)# end
ATM#
ATM# configure terminal
Enter configuration commands, one per line.
ATM(config)# interface atm 0.1 multipoint
ATM(config-subif)# lane client ethernet 1 eng_elan
ATM(config-subif)# end
ATM# show lane client
LE Client ATM0.1
Client ID: 3
Join Attempt: 11
HW Address: 00e0.4fac.b030
ATM Address: 47.00918100000000E04FACB401.00E04FACB030.01
VCD
0
27
29
30
31
ATM# copy system:running-config nvram:startup-config
Building configuration...
[OK]
ATM#

Confirming Connectivity between the ATM Switch and Other LANE Members

The following example shows how to use the show lane and ping commands to confirm the connection
between the ATM switch, routers, and LAN switches.
OL-7396-01
ELAN name: eng_elan
rxFrames txFrames Type
0 0 configure
1 14 direct
13 0 distribute 47.00918100000000E04FACB401.00E04FACB403.01
0 15 send
0 0 forward
End with CNTL/Z.
End with CNTL/Z.
End with CNTL/Z.
Admin: up State: operational
LEC up for 24 seconds
Type: ethernetMax Frame Size: 1516
ATM Address
47.00918100000000E04FACB401.00E04FACB405.00
47.00918100000000E04FACB401.00E04FACB403.01
47.00918100000000E04FACB401.00E04FACB404.01
47.00918100000000E04FACB401.00E04FACB404.01
ATM Switch Router Software Configuration Guide
LANE Configuration Examples
VLANID: 1
14-21