Controlling Atm Accounting Data Collection; Displaying The Atm Accounting Data Collection Configuration And Status - Cisco Catalyst 8540 MSR Configuration Manual

Chapter 15 Configuring ATM Accounting, RMON, and SNMP

Controlling ATM Accounting Data Collection

To configure the behavior of the buffers used for ATM accounting collection, use the following command
in privileged EXEC mode:
Command
atm accounting collection {collect-now |
swap} filename
Examples
The following example specifies that all VCs that meet the minimum age requirement should be
collected:
Switch# atm accounting collection collect-now accntg_file1
The following example swaps the buffers used to store accounting records; the old buffer is now ready
to download:
Switch# atm accounting collection swap acctng_file1

Displaying the ATM Accounting Data Collection Configuration and Status

To display the ATM accounting file configuration status, use the following EXEC command:
Command
show atm accounting
Example
The following example shows the ATM accounting status using the show atm accounting files EXEC
command:
Switch# show atm accounting
ATM Accounting Info:
Trap Threshold - 90 percent (4500000 bytes)
Interfaces:
File Entry 1: Name acctng_file1
No file buffers initialized
selection Entry -
Active selection -
<Information deleted>
OL-7396-01
AdminStatus - UP;
Descr: atm accounting data
Min-age (seconds): 3600
Failed_attempt : C0
Selection entry 1, subtree - 1.3.6.1.4.1.9.10.18.1.1
Selection entry 1, list - FF.FE.BF.FC
Selection entry 1, connType - F0.00
Selection entry 1, subtree - 1.3.6.1.4.1.9.10.18.1.1
Selection entry 1, list - FF.FE.BF.FC
Selection entry 1, connType - F0.00
Purpose
Configures the ATM accounting data
collection.
Purpose
Displays the ATM accounting status.
OperStatus : DOWN
ATM Switch Router Software Configuration Guide
Configuring ATM Accounting
15-9