Stateful Mlppp Configuration With Mr-Aps Inter-Chassis Redundancy; Monitoring And Maintaining Aps - Cisco ASR 900 Series Configuration Manual

Automatic Protection Switching Configuration
Stateful MLPPP Configuration with MR-APS Inter-Chassis
Redundancy
The Cisco ASR 903 Router supports Stateful MLPPP with Inter-Chassis Redundancy. For information on
how to configure this feature, see
mr_aps.html.

Monitoring and Maintaining APS

To provide information about system processes, the Cisco IOS software includes an extensive list of EXEC
commands that begin with the word show, which, when executed, display detailed tables of system information.
Following is a list of some of the common show commands for the APS feature.
To display the information described, use these commands in privileged EXEC mode.
• Use the show aps command to display information about APS.
• Use the show controller sonet slot command to display information about the controller port.
• use the show interfaces command to display information about the interface.
For more information about these commands, see the Cisco IOS Interface and Hardware Component Command
Reference.

Stateful MLPPP Configuration with MR-APS Inter-Chassis Redundancy

http://www.cisco.com/en/US/docs/ios/wan/configuration/guide/wan_mlppp_
Time Division Multiplexing Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco ASR 900 Series)
63