Cisco Catalyst 8540 MSR Configuration Manual page 437

Chapter 14 Configuring LAN Emulation
Router 1
router1# configure terminal
Enter configuration commands, one per line.
router1(config)# lane database example1
router1(lane-config-database)# name eng server-atm-address
47.00918100000000603E7B2001.00000C407573.01
router1(lane-config-database)# name eng server-atm-address
47.00918100000000603E7B2001.00603E7B2003.01
router1(lane-config-database)# default-name eng
router1(lane-config-database)# exit
router1(config)# interface atm 3/0
router1(config-if)# atm pvc 1 0 5 qsaal
router1(config-if)# atm pvc 2 0 16 ilmi
router1(config-if)# lane config auto-config-atm-address
router1(config-if)# lane config database example1
router1(config-if)#
%LANE-5-UPDOWN: ATM0 database example1: LE Config Server (LECS) changed state to up
router1(config-if)# interface atm 3/0.1
router1(config-subif)# ip address 172.16.0.1 255.255.0.0
router1(config-subif)# lane server-bus ethernet eng
router1(config-subif)# lane client ethernet eng
router1(config-subif)#
%LANE-5-UPDOWN: ATM0.1 elan eng: LE Client changed state to up
router1(config-subif)# end
router1#
ATM Switch Router
Switch# configure terminal
Enter configuration commands, one per line.
Switch(config)# lane database example1_backup
Switch(lane-config-database)# name eng server-atm-address
47.00918100000000603E7B2001.00000C407573.01
Switch(lane-config-database)# name eng server-atm-address
47.00918100000000603E7B2001.00603E7B2003.01
Switch(lane-config-database)# default-name eng
Switch(lane-config-database)# exit
Switch(config)# interface atm 0
Switch(config-if)# lane config auto-config-atm-address
Switch(config-if)# lane config database example1_backup
Switch(config-if)#
%LANE-5-UPDOWN: ATM2/0/0 database example1_backup: LE Config Server (LECS) changed state
to up
%LANE-6-LECS_INFO: ATM2/0/0: started listening on the well known LECS address
%LANE-6-LECS_INFO: LECS on interface ATM2/0/0 became a BACKUP
%LANE-6-LECS_INFO: ATM2/0/0: stopped listening on the well known LECS address
Switch(config-if)# interface atm 0.1 multipoint
Switch(config-subif)# ip address 172.16.0.4 255.255.0.0
Switch(config-subif)# lane server-bus ethernet eng
Switch(config-subif)#
%LANE-5-UPDOWN: ATM2/0/0.1 elan eng: LE Server/BUS changed state to up
Switch(config-subif)# lane client ethernet eng
Switch(config-subif)#
%LANE-5-UPDOWN: ATM2/0/0.1 elan eng: LE Client changed state to up
Switch(config-subif)# end
Switch#
OL-7396-01
LANE Configuration Examples
End with CNTL/Z.
End with CNTL/Z.
ATM Switch Router Software Configuration Guide
14-27