Displaying The Cds3 Frame Relay Port Adapter Controller Information; Deleting A Channel Group On The Cds3; Method One - Cisco Catalyst 8540 MSR Configuration Manual

Chapter 20 Configuring Frame Relay to ATM Interworking Port Adapter Interfaces

Displaying the CDS3 Frame Relay Port Adapter Controller Information

To display the controller configuration, use one of the following EXEC commands:
Command
show controllers t3
card/subcard/port[:t1-line] [brief | tabular]
Example
The following example displays the configuration, status, and statistics of T1 line number 1 on controller
0/1/0:
Switch# show controllers t3 0/1/0:1 tabular
T3 0/1/0:1 is up.
PAM state is Up
1CT3 H/W Version: 1.7
1CT3 F/W Version: 2.7
T3 0/1/0 T1 1
Transmitter is sending LOF Indication (RAI).
Receiver has loss of frame.
Framing is ESF, Line Code is B8ZS, Clock Source is line.
INTERVAL
12:43-12:51
12:28-12:43
12:13-12:28
11:58-12:13
11:43-11:58
11:28-11:43
11:13-11:28
10:58-11:13
Total

Deleting a Channel Group on the CDS3

This section describes two ways to delete a channel group on the CDS3 after it has been configured.
If you want to delete individual channel groups without shutting down the controller, use method one.
If you want to delete several channels groups on a controller, use method two. However, if you
use method two, you must first shut down the controller, which shuts down all channel groups on
the controller.

Method One

Perform the following steps, beginning in global configuration mode:
Command
Step 1 Switch(config)# interface serial
card/subcard/port:cgn
Step 2 Switch(config-if)# shutdown
OL-7396-01
LCV PCV CSS SELS
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
Configuring the Channelized DS3 Frame Relay Port Adapter
Purpose
Displays T3 and T1 configuration.
LES DM ES BES
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
Purpose
Selects the Frame Relay serial port and
channel group number to be deleted.
Shuts down the serial interface.
ATM Switch Router Software Configuration Guide
SES UAS SS
0 434 0
0 900 0
0 900 0
0 900 0
0 900 0
0 900 0
0 900 0
0 900 0
0 6300 0
20-5