Monitoring And Maintaining Multilink Frame Relay; Finding Feature Information In This Module; Contents; Feature Overview - Cisco ASR1002 - ASR 1002 Router Software Configuration Manual

Monitoring and Maintaining Multilink Frame
Relay
The Cisco Frame Relay implementation currently supports routing on IP, DECnet, AppleTalk, XNS,
Novell IPX, CLNS, Banyan VINES, and transparent bridging. This guide describes how to monitor and
maintain the Multilink Frame Relay feature for the Cisco ASR 1000 Series Routers.

Finding Feature Information in This Module

Your software release might not support all the features documented in this module. For the latest feature
information and caveats, see the release notes for your platform and software release. To find information
about the features documented in this module, and to see a list of the releases in which each feature is
supported, see the
page
Use Cisco Feature Navigator to find information about platform support and Cisco software image
support. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on
Cisco.com is not required.

Contents

It includes the following sections:
•
•
•
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
"Feature Information for Monitoring and Maintaining Multilink Frame Relay" section on
4.
Feature Overview, page 2
Configuring Multilink Frame Relay, page 2
Monitoring and Maintaining Frame Relay and Multilink Frame Relay, page 2