Cisco Catalyst 8540 MSR Configuration Manual page 202

Configuring Timer Rules Based Soft PVC and Soft PVP Connections
The following example is sample output from the show atm timer group command.
Switch# show atm timer group
timer-group: grp1
timer-rule
timer-rule
timer-group: grp2
timer-rule
timer-rule
timer-rule
timer-group: grp3
timer-rule
timer-rule
The following example is sample output from the show soft-vc command.
Switch#show atm soft-vc p2p int a0/0/0 10 100 detail
47.0091.8100.0000.0090.2159.a801.4000.0c80.0020.00
The following example displays the sample output from the show atm-vp for the timer rule based soft
vp connection.
Switch#sh atm vp interface ATM2/0/1 100
Interface: ATM2/0/1, Type: oc3suni
VPI = 100
Status: UP
Time-since-last-status-change: 00:04:33
Connection-type: SoftVP
Cast-type: point-to-point
Hold-priority: none
Soft vp location: Source
Remote ATM address: 47.0091.8100.0000.00d0.ba53.5501.4000.0c81.1010.00
Remote VPI: 100
Soft vp call state: Active
Number of soft vp re-try attempts: 0
First-retry-interval: 5000 milliseconds
Maximum-retry-interval: 60000 milliseconds
Aggregate admin weight: 10080
TIME STAMPS:
Current Slot:2
Outgoing Setup May 23 17:58:40.713
Incoming Connect May 23 17:58:40.733
Timer Group: group11
<information deleted>
ATM Switch Router Software Configuration Guide
7-54
rule1
rule2
rule3
rule4
rule6
rule5
rule6
Interface: ATM0/0/0, Type: oc3suni
VPI = 10 VCI = 100
Connection-type: SoftVC
Cast-type: point-to-point
Soft vc location: Source
Remote ATM address:
Remote VPI: 10
Remote VCI: 100
Soft vc call state: Active
Number of soft vc re-try attempts: 0
First-retry-interval: 5000 milliseconds
Maximum-retry-interval: 60000 milliseconds
Aggregate admin weight: 0
Timer-group: Group1
Chapter 7 Configuring Virtual Connections
OL-7396-01