Confirming Vcc Deletion - Cisco Catalyst 8540 MSR Configuration Manual

Atm switch router software configuration guide
Hide thumbs Also See for Catalyst 8540 MSR:
Table of Contents

Advertisement

Chapter 7
Configuring Virtual Connections
To delete an individual point-to-multipoint soft PVC leaf connection, perform the following steps,
beginning in global configuration mode:
Command
Step 1
Switch(config)# interface atm card/subcard/port
Switch(config-if)#
Step 2
Switch(config-if)# atm soft-vc vpi vci p2mp
Switch(atmsoft-p2mp)#
Step 3
Switch(atmsoft-p2mp)# no party leaf-reference
ref-number
Example
The following example shows how to delete only party leaf-reference 2 of the point-to-multipoint
soft PVCs configured on ATM interface 0/0/1, VPI = 50, VCI = 100:
Source(config)# interface atm 0/0/1
Source(config-if)# atm soft-vc 50 100 p2mp
Source(atmsoft-p2mp)# no party leaf-reference 2

Confirming VCC Deletion

To confirm the deletion of the point-to-multipoint soft PVCs from an interface, use the following EXEC
command before and after deleting the point-to-multipoint soft PVCs:
Command
show atm soft-vc p2mp interface atm
card/subcard/port [vpi vci]
Example
The following example shows how to confirm that all the point-to-multipoint soft PVCs are deleted from
the interface:
Source# show atm soft-vc p2mp interface atm 0/0/1 50 100
Connection does not exist
Source#
The following example shows how to confirm that an individual leaf of the point-to-multipoint
soft PVCs has been deleted from the interface:
Source# show atm soft-vc p2mp interface atm 0/0/1 50 100
Interface: ATM0/0/1, Type: oc3suni
VPI = 50
Connection-type: SoftVC
Cast-type: point-to-multipoint-root
Soft vc location: Source
Soft vc call state: Inactive
Leaf-ref
Source#
OL-7396-01
VCI = 100
VPI
VCI NSAP Address
1
50
120 47.0091.8100.0000.00e0.4fac.b401.4000.0c80.9030.00 Inactive
Configuring Point-to-Multipoint Soft PVC Connections
Purpose
Selects the interface to be configured.
Selects the soft PVC connection and changes
configuration mode.
Deletes only one leaf reference.
Purpose
Shows the point-to-multipoint soft PVCs
configured on the interface.
ATM Switch Router Software Configuration Guide
State
7-73

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst 8510 msrLightstream 1010

Table of Contents