Cisco Catalyst 8540 MSR Configuration Manual page 261

Chapter 8 Configuring Operation, Administration, and Maintenance
Example
The OAM configuration is displayed in the following example:
Switch# more system:running-config
Building configuration...
Current configuration:
!
version XX.X
no service pad
service udp-small-servers
service tcp-small-servers
!
hostname Switch
!
boot system flash slot0:rhino/ls1010-wi-m_1.083.bin.Z
!
ip rcmd remote-username doug
atm oam max-limit 1600
atm over-subscription-factor 16
atm service-category-limit cbr 3000
atm qos uni3-default
atm lecs-address 47.0091.0000.0000.0000.0000.0000.0000.0000.0000.00
atm address 47.0091.8100.0000.0060.3e5a.db01.0060.3e5a.db01.00
!
interface ATM0/0/0
no keepalive
map-group atm-1
no atm auto-configuration
no atm address-registration
no atm ilmi-enable
no atm ilmi-lecs-implied
atm iisp side user
atm pvp 99
atm oam 0 5 seg-loopback
atm oam 0 16 seg-loopback
atm oam 0 18 seg-loopback
!
interface ATM0/0/0.99 point-to-point
no atm auto-configuration
no atm address-registration
no atm ilmi-enable
no atm ilmi-lecs-implied
atm maxvp-number 0
atm oam 99 5 end-loopback
atm oam 99 16 end-loopback
atm oam 99 18 end-loopback
!
--More--
<information deleted>
OL-7396-01
cbr max-cell-loss-ratio 12
end-loopback rdi
end-loopback rdi
end-loopback rdi
rdi
rdi
rdi
ATM Switch Router Software Configuration Guide
Displaying the OAM Configuration
8-7