Cisco Catalyst 8540 MSR Configuration Manual page 305

Chapter 9 Configuring Resource Management
Switch> show atm interface resource atm 4/1/0
Resource Management configuration:
Service Classes:
CAC Configuration to account for Framing Overhead : Enabled
Pacing: disabled
overbooking :
Service Categories supported: cbr,vbr-rt,vbr-nrt,abr,ubr
Link Distance: 0 kilometers
Controlled Link sharing:
Best effort connection limit: disabled
<information deleted>
OL-7396-01
Service Category map: c2 cbr, c2 vbr-rt, c3 vbr-nrt, c4 abr, c5 ubr
Scheduling: RS c1 WRR c2, WRR c3, WRR c4, WRR c5
WRR Weight: 15 c2, 2 c3, 2 c4, 2 c5
0 Kbps rate configured, 0 Kbps rate installed
disabled
Max aggregate guaranteed services: none RX,
Max bandwidth: none cbr RX, none cbr TX, none vbr RX, none vbr TX,
none abr RX, none abr TX, none ubr RX, none ubr TX
Min bandwidth: none cbr RX, none cbr TX, none vbr RX, none vbr TX,
none abr RX, none abr TX, none ubr RX, none ubr TX
Configuring Framing Overhead
none TX
0 max connections
ATM Switch Router Software Configuration Guide
9-43