Displaying Point-To-Multipoint Ces Soft Pvc Configuration - Cisco Catalyst 8540 MSR Configuration Manual

Configuring Point-to-Multipoint CES Soft PVC Connections
For switch Dest_Two:
Dest_Two# show ces address
CES-IWF ATM Address(es):
47.0091.8100.0000.0003.6bb4.c502.4000.0c80.9030.10
Dest_Two#
Step 2 At the source switch for the point-to-multipoint CES connection, change to interface configuration mode
for CBR interface 4/0/0.
Source# config terminal
Enter configuration commands, one per line.
Source(config)# interface cbr 4/0/0
Use the ces pvc command to configure the source CES soft PVC and change to point-to-multipoint
Step 3
configuration mode.
Source(config-if)# ces pvc 1 p2mp
Source(ces-p2mp)#
Step 4 Use the party leaf-reference command to configure leaf-reference 30 and change to point-to-multipoint
party configuration mode.
Source(ces-p2mp)# party leaf-reference 30
Source(ces-p2mp-party)#
Configure the destination ATM address and the VPI and VCI of the destination connection obtained in
Step 5
Step 1.
Source(ces-p2mp-party)# dest-address 47.0091.8100.0000.0003.6bb4.c501.4000.0c80.9030.10 0 16
Source(ces-p2mp-party)# exit
Use the following similar process to configure the soft PVC connection to the Dest_Two switch:
Step 6
Source(ces-p2mp)# party leaf-reference 101
Source(ces-p2mp-party)# dest-address 47.0091.8100.0000.0003.6bb4.c502.4000.0c80.9030.10 0 2064
Source(ces-p2mp-party)# end
Source#
Step 7 Confirm the connections are up and working using the commands in the
CES Soft PVC Configuration" section on page

Displaying Point-to-Multipoint CES Soft PVC Configuration

To display the point-to-multipoint CES soft PVC configuration at either end of an ATM switch router,
use the following EXEC commands:
Command
show running-config interfaces cbr
card/subcard/port
show ces circuit interface cbr card/subcard/port
circuit-id
ATM Switch Router Software Configuration Guide
19-72
Chapter 19 Configuring Circuit Emulation Services
CBR1/1/2:1
End with CNTL/Z.
"Displaying Point-to-Multipoint
19-72.
Purpose
Shows the configuration of the CES interface.
Shows point-to-multipoint CES soft PVC
interface configuration.
vpi 0 vci 2064
OL-7396-01