Example Lane Plan And Worksheet - Cisco Catalyst 8540 MSR Configuration Manual

Chapter 14 Configuring LAN Emulation

Example LANE Plan and Worksheet

This section is an example of the LANE plan and worksheet that would be created for the example
network configuration described in
Note This example configures LANE on the route processor interface (ATM 0), rather than an ATM router
module interface. For LANE client configuration examples on ATM router module interfaces, see
Chapter 25, "Configuring ATM Router Module Interfaces."
Figure 14-2
Figure 14-2 LANE Plan Example Network
172.16.0.3
LEC, LES/BUS
The following information describes the LANE plan in
•
•
•
•
OL-7396-01
shows the single emulated LAN example network.
Router 1
LEC
atm 3/0.1
172.16.0.1
172.16.0.0
atm 0.1
main-atm 0.1
172.16.0.4
5000
Switch 1 ATM switch
LECS, LEC
LECS:
—Location: ATM_Switch
—Interface: atm 0
—ATM address: 47.00918100000000E04FACB401.00E04FACB405.00
LES:
—Location: Switch_1
—Interface/Subinterface: atm 0.1
—Type: Ethernet
—ATM address: 47.00918100000000E04FACB401.00E04FACB403.01
BUS:
—Location: Switch_1
—Interface/Subinterface: atm 0.1
—Type: Ethernet
—ATM address: "use default"
Database:
—Location: ATM_Switch
—Name: eng_dbase
Default Configuration for a Single Emulated LAN, page
Figure
ATM Switch Router Software Configuration Guide
LANE Configuration Tasks
14-2:
14-17.
14-5