Ethernet Oam Configuration Settings - D-Link DES-3528 - xStack Switch - Stackable Reference Manual

xStack® DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Unit
From Port / To Port
Mode
State
Remote Loopback
Received Remote
Loopback
Click the Apply button to implement changes made.

Ethernet OAM Configuration Settings

This window is used to configure and display the primary controls and status information for Ethernet OAM on the
Switch.
To view this window, click OAM > Ethernet OAM > Ethernet OAM Configuration Settings, as shown below:
Figure 10-14 Ethernet OAM Settings window
Description
Select the unit to configure.
Select a range of ports to be configured.
Specify to operate in either Active mode or Passive mode The default mode is Active.
Specify that the OAM function state is Enabled or Disabled. The default state is
Disabled.
Specify to Start or Stop the OAM remote loopback function.
Specify whether to Process or Ignore the received Ethernet OAM remote loopback
function. The default method is Ignore.
303