D-Link DES-3528 - xStack Switch - Stackable Reference Manual page 254

xStack® DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Authorization Network State
Authentication Server
Failover
Unit
From Port
To Port
Security Mode
Figure 8-47 Compound Authentication Settings window
Description
Click the radio buttons to enable of disable the Authorization Network State.
Click the radio buttons to configure the authentication server failover function.
Block (default setting) - The client is always regarded as un-authenticated.
Local - The Switch will resort to using the local database to authenticate the
client if RADIUS server cannot be reached. If the client fails on local
authentication, the client is regarded as un-authenticated, otherwise, it
authenticated.
Permit - The client is always regarded as authenticated. If guest VLAN is
enabled, clients will stay on the guest VLAN, otherwise, they will stay on the
original VLAN.
Select the unit to configure.
Use this drop-down menu to select the beginning port of a range of ports to be
enabled as compound authentication ports.
Use this drop-down menu to select the ending port of a range of ports to be
enabled as compound authentication ports.
The compound authentication method options include: None, Any (MAC, 802.1X
or WAC/JWAC), 802.1X+IMPB, IMPB+JWAC, IMPB+WAC, and MBA+IMPB.
None - all compound authentication methods are disabled.
Any (MAC, 802.1X or WAC) - if any of the authentication methods pass, then
access will be granted. In this mode, MAC, 802.1X and WAC/JWAC can be
enabled on a port at the same time. In Any (MAC, 802.1X or WAC/JWAC) mode,
245