Snmp Host Table Settings; Snmpv6 Host Table Settings - D-Link DES-3528 - xStack Switch - Stackable Reference Manual

xStack® DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch Web UI Reference Guide

SNMP Host Table Settings

Users can set up SNMP trap recipients for IPv4.
To view the following window, click Management > SNMP Settings > SNMP Host Table Settings, as shown below:
The fields that can be configured are described below:
Parameter
Host IP Address
User-based Security
Model
Security Level
Community String /
SNMPv3 User Name
Click the Apply button to accept the changes made.
Click the Delete button to remove the specific entry.

SNMPv6 Host Table Settings

Users can set up SNMP trap recipients for IPv6.
To view the following window, click Management > SNMP Settings > SNMPv6 Host Table Settings, as shown below:
Figure 3-41 SNMP Host Table Settings window
Description
Enter the IP address of the remote management station that will serve as the SNMP
host for the Switch.
SNMPv1 – Specify that SNMP version 1 will be used.
SNMPv2 – Specify that SNMP version 2 will be used.
SNMPv3 – Specify that SNMP version 3 will be used.
NoAuthNoPriv – To specify that the SNMP version 3 will be used, with a NoAuth-NoPriv
security level.
AuthNoPriv – To specify that the SNMP version 3 will be used, with an Auth-NoPriv
security level.
AuthPriv – To specify that the SNMP version 3 will be used, with an Auth-Priv security
level.
Enter the community string or SNMP V3 user name as appropriate.
53