Lldp Dot1 Tlvs Settings - D-Link DES-3528 - xStack Switch - Stackable Reference Manual

xStack® DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Unit
From Port / To Port
Port Description
System Name
System Description
System Capabilities
Click the Apply button to accept the changes made.

LLDP Dot1 TLVs Settings

LLDP Dot1 TLVs are organizationally specific TLVs which are defined in IEEE 802.1 and used to configure an
individual port or group of ports to exclude one or more of the IEEE 802.1 organizational port VLAN ID TLV data types
from outbound LLDP advertisements.
To view the following window, click L2 Features > LLDP > LLDP Dot1 TLVs Settings, as shown below:
Figure 4-87 LLDP Basic TLVs Settings window
Description
Select a unit to configure.
Select the port range to use for this configuration.
Use the drop-down menu to enable or disable the Port Description option.
Use the drop-down menu to enable or disable the System Name option.
Use the drop-down menu to enable or disable the System Description option.
Use the drop-down menu to enable or disable the System Capabilities option.
134