Cfm Linktrace Settings; Cfm Packet Counter - D-Link DES-3528 - xStack Switch - Stackable Reference Manual

xStack® DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch Web UI Reference Guide

CFM Linktrace Settings

This window is used to configure the CFM linktrace settings on the Switch.
To view this window, click OAM > CFM > CFM Linktrace Settings, as shown below:
The fields that can be configured are described below:
Parameter
MEP Name
MEP ID (1-8191)
MD Name
MA Name
MAC Address
TTL (2-255)
PDU Priority
Click Apply to implement changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the Delete button to remove the specific entry.
Click the Delete All button to remove all the entries.

CFM Packet Counter

This window is used to show the CFM Packet Counter List on the Switch.
To view this window, click OAM > CFM > CFM Packet Counter, as shown below:
Figure 10-10 CFM Linktrace Settings window
Description
The name of the Maintenance End Point.
The ID for the Maintenance End Point between 1 and 8191.
The Maintenance Domain Name.
The Maintenance Association Name.
The destination MAC address.
The linktrace message TTL value. The default value is 64.
The 802.1p priority to be set in the transmitted LTM. If the PDU Priority is not
specified, it uses the same priority as CCMs sent by the MA.
300