Time Zone Settings - D-Link DES-3528 - xStack Switch - Stackable Reference Manual

xStack® DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch Web UI Reference Guide

Time Zone Settings

Users can configure time zones and Daylight Savings Time settings for SNTP.
To view this window, click Network Application > SNTP > Time Zone Settings, as shown below:
The fields that can be configured are described below:
Parameter
Daylight Saving Time
State
Daylight Saving Time
Offset In Minutes
Time Zone Offset From
GMT In +/- HH:MM
Parameter
DST Repeating Settings
From: Which Week Of
The Month
Figure 9-24 Time Zone Settings window
Description
Use this pull-down menu to enable or disable the DST Settings.
Use this pull-down menu to specify the amount of time that will constitute your local
DST offset – 30, 60, 90, or 120 minutes.
Use these pull-down menus to specify your local time zone's offset from Greenwich
Mean Time (GMT.)
Description
Using repeating mode will enable DST seasonal time adjustment. Repeating mode
requires that the DST beginning and ending date be specified using a formula. For
example, specify to begin DST on Saturday during the second week of April and end
DST on Sunday during the last week of October.
Enter the week of the month that DST will start.
291