xStack® DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch Web UI Reference Guide
802.1p Settings
802.1p Default Priority Settings
The Switch allows the assignment of a default 802.1p priority to each port on the Switch. This page allows the user to
assign a default 802.1p priority to any given port on the Switch that will insert the 802.1p priority tag to untagged
packets received. The priority and effective priority tags are numbered from 0, the lowest priority, to 7, the highest
priority. The effective priority indicates the actual priority assigned by RADIUS. If the RADIUS assigned value exceeds
the specified limit, the value will be set at the default priority. For example, if the RADIUS assigns a limit of 8 and the
default priority is 0, the effective priority will be 0.
To view the following window, click QoS > 802.1p Settings > 802.1p Default Priority Settings, as shown below:
The fields that can be configured are described below:
Parameter
Unit
From Port / To Port
Priority
Click the Apply button to accept the changes made.
Figure 6-2 802.1p Default Priority Settings window
Description
Select the unit to configure.
Select the starting and ending ports to use.
Use the drop-down menu to select a value from 0 to 7.
147