Port Configuration; Port Settings - D-Link DES-3528 - xStack Switch - Stackable Reference Manual

xStack® DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch Web UI Reference Guide

Port Configuration

Port Settings

This page used to configure the details of the switch ports. To view the following window, click System Configuration
> Port Configuration > Port Settings, as shown below:
To configure switch ports:
1. Choose the port or sequential range of ports using the From Port and To Port pull-down menus.
2. Use the remaining pull-down menus to configure the parameters described below:
The fields that can be configured are described below:
Parameter
Unit
From Port / To Port
State
Speed/Duplex
Figure 2-3 Port Settings window
Description
Select the unit to configure.
Select the appropriate port range used for the configuration here.
Toggle the State field to either enable or disable a given port or group of ports.
Toggle the Speed/Duplex field to select the speed and full-duplex/half-duplex state of the
9