D-Link DES-3528 - xStack Switch - Stackable Reference Manual page 42

xStack® DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Get IP From
Interface Name
IPv4 Address
Subnet Mask
VLAN Name
IPv4 State
Interface Admin State
Click the Apply button to accept the changes made.
Click the <<Back button to discard the changes made and return to the previous page.
Click the IPv6 Edit button to see the following window.
The fields that can be configured are described below:
Parameter
Interface Name
IPv6 State
Interface Admin State
IPv6 Network Address
(e.g.: 3710::1/64)
DHCPv6 Client
NS Retransmit Time (0-
4394967295)
Automatic Link Local
Address
Click the Apply button to accept the changes made for each individual section.
Click the <<Back button to discard the changes made and return to the previous page.
Click the View All IPv6 Address
Description
Use the drop-down menu to specify the method that this Interface uses to acquire an IP
address.
Enter the name of the IP interface being configured.
Enter the IPv4 address used.
Enter the IPv4 subnet mask used.
Enter the VLAN Name used.
Use the drop-down menu to enable or disable IPv4 State.
Use the drop-down menu to enable or disable the Interface Admin State.
Figure 3-11 IPv6 Interface Settings – IPv6 Edit window
Description
Display the IPv6 interface name.
Use the drop-down menu to enable or disable IPv6 State.
Use the drop-down menu to enable or disable the Interface Admin State.
Enter the neighbor's global or local link address.
Use the drop-down menu to enable or disable the DHCPv6 client.
Enter the Neighbor solicitation's retransmit timer in millisecond here. It has the same
value as the RA retransmit time in the configuration of the IPv6 ND RA command. If
this field is configure, it will duplicate the enter into the RA field.
Use the drop-down menu to enable or disable the Automatic Link Local Address.
link to view all the current IPv6 address.
33