Ethernet Oam Configuration Settings - D-Link xStack Reference Manual

®
xStack DGS-3200 Series Layer 2 Managed Gigabit Ethernet Switch Web UI Reference Guide
Remote Loopback
Received Remote
Loopback
Click Apply to implement the chages.

Ethernet OAM Configuration Settings

This window is used to configure Ethernet OAM configuration settings.
To view the following window, click OAM > Ethernet OAM > Ethernet OAM Configuration Settings:
The following parameters can be configured:
Parameter
From Port / To Port
Link Event
Link Monitor
Use the drop-down menu to select Ethernet OAM remote loopback.
None – Select to disable the remote loopback.
Start – Select to request the peer to change to the remote loopback mode.
Stop - Select to request the peer to change to the normal operation mode.
Use the drop-down menu to configure the client to process or to ignore the received Ethernet
OAM remote loopback command.
Process – Select to process the received Ethernet OAM remote loopback command.
Ignore - Select to ignore the received Ethernet OAM remote loopback command.
Figure 9 - 2. Ethernet OAM Configuration Settings window
Description
Select a range of ports you wish to configure.
Use the drop-down menu to select the link events, Link Monitor or Critical Link Event.
Use the drop-down menu to select link monitor. Available options are Error Symbol, Error
Frame, Error Frame Period, and Error Frame Seconds.
249