Pppoe Circuit Id Insertion Settings - D-Link DES-3528 - xStack Switch - Stackable Reference Manual

xStack® DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch Web UI Reference Guide
DNS Relay Static Settings
To view this window, click Network Application > DNS > DNS Relay > DNS Relay Static Settings, as shown below:
The fields that can be configured are described below:
Parameter
Domain Name
IP Address
Click Apply to implement changes made.
Click the Delete button to remove the specific entry.

PPPoE Circuit ID Insertion Settings

This window allows to enable or disable PPPoE Circuit ID Insertion.
To view this window, click Network Application > PPPoE Circuit ID Insertion Settings, as shown below:
The fields that can be configured are described below:
Parameter
PPPoE Circuit ID
Insertion
Click the Apply button to accept the changes made.
Figure 9-21 DNS Relay Static Settings window
Description
Enter a domain name.
Enter the IP address associated with the domain name.
Figure 9-22 PPPoE Circuit ID Insertion Settings window
Description
Click the radio buttons to enable of disable the PPPoE circuit ID insertion. When enabled, the
system will insert the circuit ID tag to the received PPPoE discover request and the request
packet if the tag is absent. It will remove the circuit ID tag from the received PPPoE offer and
session confirmation packet.
289