Ip Interface; System Ip Address Settings - D-Link DES-3528 - xStack Switch - Stackable Reference Manual

xStack® DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch Web UI Reference Guide
Parameter
Interface Name
Neighbor IPv6 Address
Link Layer MAC Address
Interface Name
State
Click the Add button to add a new entry based on the information entered.
Click the Find button to locate a specific entry based on the information entered.
Click the Clear button to clear all the information entered in the fields.

IP Interface

System IP Address Settings

The IP address may initially be set using the console interface prior to connecting to it through the Ethernet. The Web
manager will display the Switch's current IP settings.
NOTE: The Switch's factory default IP address is 10.90.90.90 with a subnet mask of 255.0.0.0 and a
default gateway of 0.0.0.0.
To view the following window, click Management > IP Interface > System IP Address Settings, as shown below:
The fields that can be configured are described below:
Parameter
Static
DHCP
Description
Enter the interface name of the IPv6 neighbor.
Enter the neighbor IPv6 address.
Enter the link layer MAC address.
Enter the interface name of the IPv6 neighbor. To search for all the current interfaces
on the Switch, go to the second Interface Name field in the middle part of the window,
tick the All check box. Tick the Hardware option to display all the neighbor cache
entries which were written into the hardware table.
Use the drop-down menu to select All, Address, Static, or Dynamic. When the user
selects address from the drop-down menu, the user will be able to enter an IP address
in the space provided next to the state option.
Figure 3-7 System IP Address Settings window
Description
Allow to assign the entry of an IP address, subnet mask, and a default gateway for the
Switch manually.
The Switch will send out a DHCP broadcast request when it is powered up. The DHCP
30