Wac Port Settings - D-Link DES-3528 - xStack Switch - Stackable Reference Manual

xStack® DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch Web UI Reference Guide

WAC Port Settings

Users can view and set port configurations for Web authentication.
To view this window, click Security > Web-based Access Control (WAC) > WAC Port Settings, as shown below:
The fields that can be configured are described below:
Parameter
Unit
From Port
To Port
Aging Time (1-1440)
State
Idle Time (1-1440)
Figure 8-39 WAC Port Settings window
Description
Select the unit to configure.
Use this drop-down menu to select the beginning port of a range of ports to be enabled as
WAC ports.
Use this drop-down menu to select the ending port of a range of ports to be enabled as
WAC ports.
This parameter specifies the time period during which an authenticated host will remain in
the authenticated state. Enter a value between 1and 1440 minutes. Tick the Infinite check
box to indicate the authenticated host will never age out on the port. The default value is
1440 minutes (24 hours).
Use this drop-down menu to enable the configured ports as WAC ports.
If there is no traffic during the Idle Time parameter, the host will be moved back to the
unauthenticated state. Enter a value between 1 and 1440 minutes. Tick the Infinite check
235