Chapter 7 Acl; Acl Configuration Wizard - D-Link DES-3528 - xStack Switch - Stackable Reference Manual

xStack® DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch Web UI Reference Guide
Chapter 7

ACL Configuration Wizard

Access Profile List
CPU Access Profile List
ACL Finder
ACL Flow Meter
ACL Configuration Wizard
The ACL Configuration Wizard will aid the user in the creation of access profiles and ACL Rules automatically by
simply inputting the address or service type and the action needed. It saves administrators a lot of time.
To view this window, click ACL > ACL Configuration Wizard, as shown below:
The fields that can be configured are described below:
Parameter
Type
Profile Name
Profile ID (1-14)
Access ID (1-128)
From / To
ACL
Figure 7-1 ACL Configuration Wizard window
Description
Select one of two general ACL Rule types:
Normal – Selecting this option will create a Normal ACL Rule.
CPU – Selecting this option will create a CPU ACL Rule.
After selecting to configure a Normal type rule, enter the Profile Name for the new rule here.
Enter the Profile ID for the new rule.
Enter the Access ID for the new rule. Selecting the Auto Assign option will allow the Switch
to automatically assign an unused access ID to this rule.
This rule can be created to apply to four different categories:
Any – Selecting this option will include any starting category to this rule.
MAC Address – Selecting this option will allow the user to enter a range of MAC addresses
165