D-Link DES-3528 - xStack Switch - Stackable Reference Manual page 118

xStack® DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
MLD Snooping State
Max Learning Entry Value
(1-1024)
Click the Apply button to accept the changes made for each individual section.
Click the Edit button to configure the MLD Snooping Parameters Settings for a specific entry.
Click the Modify Router Port
After clicking the Edit button, the following page will appear:
The fields that can be configured or viewed are described below:
Parameter
VID
VLAN Name
Rate Limit
Querier IP
Querier Expiry Time
Query Interval (1-65535)
Figure 4-54 MLD Snooping Settings window
Description
Click the radio buttons to enable or disable the MLD snooping state.
Enter the maximum learning entry value.
link to configure the MLD Snooping Router Port Settings for a specific entry.
Figure 4-55 MLD Snooping Parameters Settings window
Description
Specify the name of the VLAN ID.
Specify the name of the VLAN for which IGMP snooping querier is to be configured.
This displays the rate of IGMP control packets that the Switch can process on a
specific VLAN. The rate is specified in packet per second. The packets that exceed
the limited rate will be dropped.
Displays the querier IP address
Displays the querier expiry time.
Specify the amount of time in seconds between general query transmissions. The
default setting is 125 seconds.
109