Mac Address Table - D-Link DES-3528 - xStack Switch - Stackable Reference Manual

xStack® DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
MAC Address Aging Time
(10-1000000)
Click the Apply button to accept the changes made.

MAC Address Table

This allows the Switch's MAC address forwarding table to be viewed. When the Switch learns an association between
a MAC address, VLAN and a port number, it makes an entry into its forwarding table. These entries are then used to
forward packets through the Switch.
To view the following window, click L2 Features > FDB > MAC Address Table, as shown below:
The fields that can be configured are described below:
Parameter
Unit
Port
VLAN Name
MAC Address
Security
Figure 4-39 MAC Address Aging Time Settings window
Description
This field specifies the length of time a learned MAC Address will remain in the
forwarding table without being accessed (that is, how long a learned MAC Address is
allowed to remain idle). To change this option, type in a different value representing
the MAC address' age-out time in seconds. The MAC Address Aging Time can be set
to any value between 10 and 1000000 seconds. The default setting is 300 seconds.
Figure 4-40 MAC Address Table window
Description
Select the unit to configure.
The port to which the MAC address below corresponds.
Enter a VLAN Name for the forwarding table to be browsed by.
Enter a MAC address for the forwarding table to be browsed by.
Tick the check box to display the FDB entries that are created by the security module.
97