Multicast Filtering; Ipv4 Multicast Filtering - D-Link DES-3528 - xStack Switch - Stackable Reference Manual

xStack® DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch Web UI Reference Guide
Untagged Member Ports
Tagged Member Ports
Untagged Source Ports
Tagged Source Ports
Click the Select All button to select all the ports for configuration.
Click the Clear All button to unselect all the ports for configuration.
Click the Apply button to accept the changes made.
C lick the <<Back button to discard the changes made and return to the previous page.
After clicking the Profile List
Figure 4-74 MLD Snooping Multicast VLAN Group List Settings window
The fields that can be co
Parameter
VID
VLAN Name
Profile Name
Click the Add button to add a new entry based on the information entered.
Click the Delete button to remove the specific entry.
C lick the Show MLD Snooping Multicast VLAN Entries
M ulticast Filtering
I Pv4 Multicast Filtering
IPv4 Multicast Profile Settings
Users can add a profile to which multicast address(s) reports are to be received on specified ports on the Switch. This
function will therefore limit the number of reports received and the number of multicast groups configured on the Swit
The user may set an IPv4 Multicast address or range o
reports (Deny) coming into the specified switch ports.
Specify the untagged member port of the multicast VLAN. Click the Select
to select all the ports or click the Clear All button to unselect all the ports.
Specify the tagged member port of the multicast VLAN. Click the Select
select all the ports or click the Clear All button to unselect all the ports.
Specify the source port or range of source ports as untagged members of the
multicast VLAN. The PVID of the untagged source port is automatically changed to
the multicast VLAN. Source ports must be either tagged or untagged for any single
multicast VLAN, i.e. both types cannot be members of the same multicast VLAN
Specify the source port or range of source ports as tagged members of the multicast
VLAN.
link, the following page will appear:
nfigured are de scribed below:
Description
Display the VLAN ID.
Display the VLAN name.
Use the drop-down menu to select the IGMP Snooping Multicast VLAN Group Profile name.
link to view the MLD Snooping Multicast VLAN Settings.
f IPv4 Multicast addresses to accept reports (Permit) or deny
123
All button
All button to
ch.